Basic Operations
English
16
DXZ775USB
Adjusting Sound Setting
Mode
●
Setting the preset setting
This function allows you to recall, save or
initialize the sound settings.
If your speaker system is “
3WAY
” or “
2WAY
”,
you can store and recall up to three adjustments
you have made to “
P.EQ ON/OFF
”, “
X-OVER
”,
“
T ALIGNMENT
”, “
SPEAKER GAIN
”.
LOAD
: To recall the stored sound settings.
SAVE
: To save the sound settings.
INITIAL
: To initialize the sound settings.
The load and the save can be adjusted as
follows.
2-1. Select “
PRESET
”.
3-1. Press the [ ] button.
3-2. Push the [
SEEK PANEL
] leftward or
rightward and select from:
“
LOAD
”
↔
“
SAVE
”
↔
“
INITIAL
”
↔
“
LOAD
”...
3-3. Push the [
P.CH
] button upward or
downward to adjust the load and the save.
LOAD
:“
SELECTING 1
” to “
SELECTING
3
” (The factory default setting is
“
SELECTING 1
”)
SAVE
:“
1
” to “
3
” (The factory default
setting is “
1
”)
3-4. Press and hold the [ ] button to
store into memory.
(LOAD: Press and hold the button for 1
second or longer.
SAVE: Press and hold the button for 2
seconds or longer.)
●
Setting the all seat
The setting of “
T ALIGNMENT
” and “
SPEAKER
GAIN
” temporarily returns to the factory default
setting. When the setting that is adjusted for the
driver's seat returns to the factory default
setting, a sound suitable for all seats is
provided.
∗
The factory default setting is “
OFF
”.
2-1. Select “
ALL SEAT
”.
3-1. Push the [
P.CH
] button upward or
downward to select “
ON
” or “
OFF
”.
To change sound setting mode
1. Press and hold the [ ] button for 2
seconds or longer and select the sound
setting mode to adjust.
2. Push the [
SEEK PANEL
] leftward or
rightward to select the “item name”.
When speaker system is “
NORMAL
”:
“PRESET” ↔ “ALL SEAT” ↔ “T
ALIGNMENT” ↔ “P.EQ ON/OFF” ↔ “EQ
SELECT” ↔ “SUB WOOFER” ↔
“PRESET”...
When speaker system is “3WAY”:
“PRESET” ↔ “ALL SEAT” ↔ “X-OVER”
↔ “T ALIGNMENT” ↔ “SPEAKER GAIN”
↔ “P.EQ ON/OFF” ↔ “EQ SELECT” ↔
“SUB WOOFER” ↔ “PRESET”...
When speaker system is “2WAY”:
“PRESET” ↔ “ALL SEAT” ↔ “X-OVER”
↔ “T ALIGNMENT” ↔ “SPEAKER GAIN”
↔ “P.EQ ON/OFF” ↔ “EQ SELECT” ↔
“PRESET”...
∗ In the case of item names appearing with
the “ENT” suffix, after the item name, the
[] button must be pressed to display
the setting value.
∗ After completing settings, press the
[]
button to return to the previous mode.
DXZ775USB_EN.book 16 ページ 2006年12月25日 月曜日 午前11時37分