Filter
Top Products
Basic Operations
English
12
DXZ775USB
Adjusting Sound Mode
●
Adjusting the subwoofer output
volume
You can adjust the volume output from the unit’s
subwoofer output terminal.
“
S-W VOLUME
” can be adjusted only when
“
SUB WOOFER
” is set to “
ST
” or “
MONO
”
(page 19).
2-1. Select the “
S-W VOLUME
”.
3-1. Push the [
P.CH
] button upward or
downward to change the output volume.
∗
The factory default setting is “
0
”.
(Setting range: +6 to –6)
●
Setting the Digital Z-Enhancer
This unit are provided with 3 types of sound
tone effects stored in memory. Select the one
you prefer.
∗
The factory default setting is “
DZE OFF
”.
2-1. Select the “
DZE
”.
3-1. Press the [ ] button.
3-2. Push the [
SEEK PANEL
] leftward or
rightward to select the tone effect. Each
time you push the [
SEEK PANEL
], the tone
effect changes in the following order:
“
DZE OFF
”
↔
“
DZE 1
”
↔
“
DZE 2
”
↔
“
DZE
3
”
DZE OFF
: no sound effect
DZE 1
: Suitable for genuine speakers
DZE 2
: Suitable for separate
speakers
DZE 3
: Suitable for co-axial speakers
3-3. When the “
DZE 1
”, “
DZE 2
” or “
DZE 3
” is
set, push the [
P.CH
] button upward or
downward to change the DZE level from +3
to –3.
∗
The factory default setting is “
0
”.
To change sound mode
1. Press the [ ] button and select the sound
mode to adjust.
2. Push the [
SEEK PANEL
] leftward or
rightward to select the “item
name”.
When speaker system is “
NORMAL
”:
“
S-W VOLUME
”
↔
“
DZE
”
↔
“
P.EQ
”
↔
“BASS” ↔ “TREBLE” ↔ “S RESTORER”
↔ “HPF” ↔ “S-W LPF” ↔ “BALANCE” ↔
“FADER”
When speaker system is “3WAY”:
“S-W VOLUME” ↔ “DZE” ↔ “P.EQ” ↔
“BASS” ↔ “TREBLE” ↔ “S RESTORER”
↔ “BALANCE”
When speaker system is “2WAY”:
“DZE” ↔ “P.EQ” ↔ “BASS” ↔ “TREBLE”
↔ “S RESTORER” ↔ “BALANCE” ↔
“FADER”
3. Push the [P.CH] button upward or
downward to select the “desired setting
value”.
∗ In the case of item names appearing with
the “ENT” suffix after the item name, the
[] button must be pressed to display
the setting value.
∗ “P.EQ” can be adjusted only when the
“P.EQ ON/OFF” is set to “ON” (page 19)
and “EQ SELECT” is set to “P.EQ” (page
19).
∗ “BASS” and “TREBLE” can be adjusted
only when “DZE” is set to “DZE OFF” (page
12) and “EQ SELECT” is set to “B/T” (page
19).
∗ After completing settings, press the
[]
button to return to the previous mode.
Note:
• During sound adjustment mode, if no operation
is performed for more than 10 seconds, this
mode can be canceled and return to the
previous mode.
DXZ775USB_EN.book 12 ページ ２００６年１２月２５日 月曜日 午前１１時３７分