Filter
Top Products
English
19
XMD3
8. IN CASE OF DIFFICULTY
Problem Cause Solution
Power does not turn on. (No sound is pro-
duced.)
Compact disc cannot be loaded.
Sound skips or is noisy.
Sound is bad directly after power is turned
on.
Nothing happens when buttons are
pressed. display is not accurate.
Fuse is blown.
Incorrect wiring.
Another compact disc is already loaded.
Compact disc is dirty.
Compact disc is heavily scratched or
warped.
Water droplets may form on the internal lens
when the car is parked in a humid place.
Microprocessor has malfunctioned due to
noise, etc.
Replace with a fuse of the same amperage. If
the fuse blows again, consult your store of pur-
chase.
Consult your store of purchase.
Eject the compact disc before loading the new
one.
Clean the compact disc with a soft cloth.
Replace with a compact disc with no scratches.
Let dry for about 1 hour with the power on.
Turn off the power, then open the [ DOOR ] by up
the [ HOOK ] .
Press the reset button for about 2 seconds with
a thin rod.
Reset Button