Filter
Top Products
PHYSICAL FADER ASSIGNMENT (OPTIONAL SETUP)
Use this feature to combine or unify fixture control attributes for different fixtures. For example; if you
were controlling 4 moving mirrors and 4 moving yokes, the color, gobo and dimmer channels may not
line up ideally on the physical faders. Use this function to re-assign the dimmer, color and gobo
channels to faders 1, 2 and 3. From now on you will be able to control the same attributes on all
fixtures using the same fader location.
Action
1) Press and hold PROGRAM & TAPSYNC
buttons together (1) time to access the
channel assignment mode.
2) Press a FIXTURE button that represents
the fixture whose faders you would like to
re-assign.
3) Move the SPEED fader until you arrive at
controller channel (number).
4) Move the FADE TIME fader to select the
DMX channel.
5) Make all changes, and the press the
MIDI/ADD button to confirm setting.
6) Repeat steps 3 ~ 5 as often as necessary.
If you wish to copy a scanner’s physical
assignments to another scanner, continue by
following steps 7-13. If you do not wish to do this,
press and hold PROGRAM & TAPSYNC buttons
(2) times to exit mode.
Example: Copying Scanner 1 into
Scanner 2
7) Press and hold FIXTURE button # 1.
8) While holding button # 1 press FIXTURE
button # 2.
9) While holding FIXTURE buttons # 1 and #
2, press and hold MIDI/ADD button.
10) Release FIXTURE button # 1 first before
releasing FIXTURE button # 2.
11) Release MIDI/ADD button.
12) All FIXTURE LED indicators will flash to
confirm successful copy.
13) Press and hold PROGRAM & TAPSYNC
buttons (2) times to exit mode.
Notes
All physical faders can be re-assigned to output on a
different DMX channel. Faders are given a channel
number and are labeled on the surface of the
controller as such.
Obey™ 40 User Manual 9 Revised: 2008-06-13 15:54:24