Filter
Top Products
22
Equalizer
This car audio system is equipped with
a parametric digital equalizer. In this
case, parametric means that it is possi-
ble to individually raise or lower one fre-
quency (GAIN +10 to -20 dB) for each
of the five filters.
The following filters are available:
● SUB LOW EQ 32 to 50 Hz
● LOW EQ 63 to 250 Hz
● MID EQ 315 to 1250 Hz
● MID/HIGH EQ 1600 to 6300 Hz
● HIGH EQ 8000 to 12500 Hz
These filters can be adjusted without the
use of measuring equipment. As a re-
sult, it is possible to significantly influ-
ence the in-vehicle acoustics.
Notes on making equalizer
settings
We recommend that you use a CD you
are familiar with to make the settings.
Before you set the equaliser, set bass,
treble, balance and fader to “0” and de-
activate the Loudness function. For
more information on how to do this, re-
fer to the section on “Tone and balance/
fader”.
➮ Now listen to the CD you have se-
lected.
➮ Evaluate the sound according to
your own personal preferences.
➮ Now refer to “Sound impression” in
the following table.
➮ Make the settings for the equalizer
as described under “What to do”.
Switching the equalizer on/off
➮ To switch the equalizer on, press
and hold down DEQ < until EQ
lights up in the display and “EQ
ON” appears briefly.
➮ To switch the equalizer off, press
and hold down DEQ < until EQ
no longer lights up in the display
and “EQ OFF” appears briefly.
Adjusting the equalizer
➮ Press DEQ <.
➮ Press or : to select
“DIGITAL EQ”.
➮ Press or : to select the filter.
➮ Press or :.
➮ To select the frequency, press
:.
➮ To adjust the level, press or
:.
➮ To select the next filter, first press
OK ; and then
or :.
➮ Once you have completed making
all of the necessary adjustments,
press DEQ <.
EQUALIZER