Filter
Top Products
13
FRANÇAIS
ENGLISH
ESPAÑOL
PORTUGUÊS
Adjusting the scan time
➮ Press MENU 8.
➮ Press : repeatedly until
“SCANTIME” appears in the dis-
play.
➮ Press : to set the scan time
as desired.
➮ Once you have made your selec-
tion, press MENU 8 or OK ;.
Note:
The scan time selected also applies to
the SCAN function for theCD player and
the CD changer operation.
Optimising radio reception
Interference-related treble cut
(HICUT)
The HICUT function improves reception
when reception begins to deteriorate. If
interference occurs, then the treble and
the noise is cut automatically.
Switching HICUT on/off
➮ Press MENU 8.
➮ Press : repeatedly until “HI-
CUT” appears in the display.
➮ Press or : to switch HICUT
on or off.
“HICUT 0” indicates that the function is
switched off; when “HICUT 3” appears,
the treble will be automatically cut as
far as possible.
➮ Press MENU 8 or OK ;.
RADIO OPERATION
Interference-dependent bandwidth
switching (SHARX)
The SHARX function allows you to vir-
tually eliminate interference from neigh-
bouring radio stations. When you are in
a reception area with a large number of
radio station signals, switch the SHARX
function on.
Switching SHARX on/off
➮ Press MENU 8.
➮ Press : repeatedly until
“SHARX” appears in the display.
➮ Press or : to switch SHARX
on or off.
“SHARX OFF” means no bandwidth
switching, “SHARX ON” means auto-
matic bandwidth switching.
➮ Press MENU 8 or OK ;.
Selecting the display of variable
text
A number of radio stations use the RDS
signal to transmit advertising or other
texts in place of their station names.
These “variable texts” will appear in the
display. It is possible to adjust your ra-
dio so that these “variable texts” do not
appear.
➮ Press and hold down RDS 4 until
“NAME FIX” appears in the display.
➮ To have the “variable texts” dis-
played again, press and hold down
RDS 4 until “NAME VAR” appears
in the display.