Cary Audio Design CD 303 T SACD CD Player User Manual


 
USE WITH A COMPUTER
USE WITH A WINDOWS COMPUTER
If your Windows computer does not meet these minimum requirements, you may experience
lagging of audio and possible freezing of your computer during operation:
Microsoft Windows XP (with SP2) or Microsoft Windows Vista or Microsoft
Windows 7
Available USB 2.0 port (High speed for USB2.0)
Intel Pentium 4 processor or equivalent AMD Athlon processor
Motherboard with Intel or VIA chipset
5400 RPM or faster hard disc drive (7200 RPM or Faster with 8MB cache
recommended)
256MB or more of RAM (512MB recommended)
PC-DRIVE INSTALLATION
To use the CD303T SACD Professional Version USB port efficiently on any computer, it is important
to install all the necessary drivers from the Cary Audio website. We advise users to read all
instructions carefully before beginning the installation process, as they will be asked to disconnect
and reconnect their CD303T SACD Professional Version.
Starting the PC Driver Installation:
1. Download the CARY USB Driver from www.caryaudio.com.
2. Unzip the CARY USB Driver.
3. Double click CARY USB setup.exe to begin the installation.
4. Click NEXT to install the CARY USB Driver on your computer.
5. Click INSTALL to begin the installation.
6. Click FINISH to complete the setup wizard.
7. Connect your USB cable from the component to your computer.
8. After connecting the component to your PC, the computer should make a tone
signifying that a new device has been connected.
9. The PC Driver installation is complete and the component can be used.
APPLE COMPUTER COMPATABILITY
Apple computers can transmit a 24/192 kHz signal to the CD 303T over the optical inputs. Most of
the recent model Apple computers contain a mini optical digital audio output that can transmit
24/192 kHz high-resolution audio files to the CD 303T.
However, a USB driver capable of accepting a 24/192 kHz signal has not yet been created for
Apple computers. Due to its sophistication and its ability to receive a 24/192 kHz signal, the USB
input on the CD 303T was specifically written for Windows-based computers.
20