Filter
Top Products
1
2
3
4 OPERATION
USER MANUAL
Q-P OWER S ER IES
P. 18
Q - P O W E R
SERIES
Q-POWER Filter Assembly
1 Foam Filter
2 Front Frame
3 Screw
4.7 Filter Cleaning
The air intake on the front of your Q-POWER Amplifier is fitted with a removable
filter system. If the filter becomes clogged, the unit will not cool as efficiently as
it should and may result in reduced output levels.
WARNING: Turn off the amplifier before removing the front frame.
To clean or replace the filter just slightly unscrew the fixing screw (3) without
completely removing it from the front frame (it is held back by a small plas-
tic spacer on the back side of the frame to avoid loosing the screw). Then shift
the front frame slightly to the right. Then you should be able to remove the
frame from the amplifier completely (pull gently to avoid any bending of the
front frame).