Filter
Top Products
4
Dipole Unit Stand
Align the Dipole Unit Stand to the Dipole Unit. Using the Ball-fastener
provided, attach the Dipole Unit Stand to the Dipole Unit, (see
diagram A)
.
Tilting the Dipole Unit
Loosen the Ball-fastener below the Dipole Unit Stand to adjust the tilt of the
Dipole Unit. The Dipole Unit can be angled to face you by moving the Dipole
Unit back or forth (see
diagram B
). Tighten the Ball-fastener once the optimum
tilt has been achieved (see
diagram C
).
A
Ball-fastener
Dipole Unit Stand
B
C
PS2000 Digital_Final_01082000.fm Page 4 Tuesday, August 1, 2000 1:26 PM