Cambridge SoundWorks PS2000 Speaker System User Manual


 
-2
READ INSTRUCTIONS – All safety and
operating instructions should be read
before the product is operated.
RETAIN INSTRUCTIONS – The safety and
operating instructions should be retained
for future reference.
HEED WARNINGS – All warnings on the
product and in the operating instructions
should be adhered to.
FOLLOW INSTRUCTIONS – All operating
and use instructions should be followed.
CLEANING – Unplug this product from the
wall outlet or other power source before
cleaning. Do not use liquid cleaners or aerosol
cleaners. Use a damp cloth for cleaning.
ATTACHMENTS – Do not use attachments
not recommended by Cambridge
SoundWorks as they may cause hazards.
WATER AND MOISTURE – Do not use this
product near water; for example, near a
bath tub, wash bowl, kitchen sink, or
laundry tub; in a wet basement; or near a
swimming pool; and the like.
ACCESSORIES – Do not place this product
on an unstable cart, stand, tripod, bracket,
or table. The product may fall, causing
serious injury to a person, and serious
damage to the product. Use only with a
cart, stand, tripod, bracket, or table
recommended by Cambridge SoundWorks,
or sold with the product. Any mounting of
the product should follow the
manufacturer’s instructions, and should
use a mounting accessory recommended by
Cambridge SoundWorks.
VENTILATION – Slots and openings in the
cabinet are provided for ventilation, to
ensure reliable operation of the product and
to prevent it from overheating. These
openings must not be blocked or covered.
The openings should never be blocked by
placing the product on a bed, sofa, rug, or
other similar surface. This product should
not be placed in a built-in installation such
as a bookcase or rack unless proper
ventilation is provided or Cambridge
SoundWorks’ instructions have been
adhered to.
HEAT – This product should be situated
away from heat sources such as radiators,
heat registers, stoves, and other products
(including amplifiers) that produce heat.
POWER SOURCES – This product should be
operated only from the type of power source
indicated on the marking label. If you are
not sure of the type of power supply to your
home, consult your product dealer or local
power company. For products intended to
operate from battery power or other
sources, refer to the operating instructions.
POLARIZATION – This product may be
equipped with a polarized alternating-
current line plug (a plug having one blade
wider than the other). This plug will fit into
the power outlet only one way. This is a
safety feature. If you are unable to insert
the plug fully into the outlet, try reversing
the plug. If the plug should still fail to fit,
contact your electrician to replace your
obsolete outlet. Do not defeat the safety
purpose of the polarized plug.
POWER-CORD PROTECTION – Power-
supply cords should be routed so that they
are not likely to be walked on or pinched by
items placed upon or against them, paying
particular attention to cords at plugs,
convenience receptacles, and the point
where they exit from the product.
LIGHTNING – For added protection for this
product during a lightning storm, or when
it is left unattended and unused for long
periods of time, unplug it from the wall
outlet. This will prevent damage to the
product due to lightning and power-line
surges.
OVERLOADING – Do not overload wall
outlets, extension cords, or integral
convenience receptacles as this can result
in a risk of fire or electric shock.
OBJECT AND LIQUID ENTRY – Never push
objects of any kind into this product
through openings as they may touch
dangerous voltage points or short out parts
that could result in a fire or electric shock.
Never spill liquid of any kind on the
product.
SERVICING – Do not attempt to service this
product yourself, as opening or removing
covers may expose you to dangerous
voltage or other hazards. Refer all servicing
to qualified service personnel.
DAMAGE REQUIRING SERVICE – Unplug
this product from the wall outlet or other
power source and refer servicing to
qualified service personnel under the
following conditions:
a) When the power-supply cord or plug is
damaged.
b) If liquid has been spilled into, or objects
have fallen onto the product.
c) If the product has been exposed to rain
or water.
d) If the product does not operate normally
by following the operating instructions;
or exhibits a distinct change in
performance.
e) If the product has been dropped or
damaged in any way.
REPLACEMENT PARTS – When
replacement parts are required, be sure the
service technician has used replacement
parts specified by Cambridge SoundWorks
or have the same characteristics as the
original parts. Unauthorized substitutions
may result in fire, electric shock, or other
hazards.
SAFETY CHECK – Upon completion of any
service or repairs to this product, ask the
service technician to perform safety checks
to determine that the product is in proper
operating condition.
WALL OR CEILING MOUNTING – The
product should be mounted to a wall or
ceiling only as recommended by Cambridge
Soundworks.
PS2000 Digital_Final_01082000.fm Page -2 Tuesday, August 1, 2000 1:26 PM