Filter
Top Products
8
6.
ANALOG
(On Remote Control)
:
Selects the analog input source signal
from the analog LINE IN input or both the analog LINE IN and REAR IN
inputs for FourPointSurround sound. (This function is also available on the
Dipole Unit, use the SOURCE button) FourPointSurround sound is auto-
selected when the front and rear analog inputs are connected. The possible
analog input signals are; Stereo, FourPointSurround (FPS) and CMSS.
These signals are auto-detected.
7. MIX (On Remote Control)
:
Combines both digital and analog source
signals. The LEDs blink when there is no AC-3 signal. (This function is also
available on the Dipole Unit, use the SOURCE button) The possible mixed
input signals are; Analog + 2-Ch PCM, Analog + 2-Ch AC-3, Analog + 5.1-
Ch AC-3. These signals are auto-detected.
Note:
For optimum sound reproduction, choose DIGITAL when connected
to digital sources or ANALOG when connected to analog sources.
Stereo CMSSFourPointSurround
Analog
+
2-Ch PCM
Analog
+
2-Ch AC-3
Analog
+
5.1-Ch AC-3
PS2000 Digital_Final_01082000.fm Page 8 Tuesday, August 1, 2000 1:26 PM