Cambridge Audio Multi-room speaker system Speaker System User Manual


 
8 Incognito multi-room
SOURCE CONNECTIONS
Audio ssource cconnections
It is possible to connect a total of six audio source components to
the AH10. The connections are made from a line level output on the
source equipment to one of the six inputs on the AH10 using
RCA/phono to RCA/phono cables.
Video ssource cconnections
When using a VH10 each of the six sources can also supply video.
The connections are made from a composite video output on the
source equipment to one of the six inputs on the VH10 using good
quality 75ohm RCA/phono to RCA/phono video cables.
Remote ccontrol oof ssource eequipment tthrough tthe KKP10
For remote control of the source equipment, six routed IR outputs
are provided. Individual IR emitters are plugged into the appropriate
IR output (corresponding to the respective audio input) the other
end is stuck to the IR receiving window of the source equipment
(see below).
Audio
Output
Audio
Output
L
R
Audio Inputs from Sources
Audio Inputs from Sources
Source 6Source 5Source 4Source 3Source 2Source 1
Source 6 Source 5 Source 4 Source 3 Source 2 Source 1
L
R
L
R
FM 75
AM 300
Control Bus
Control Bus
In
Out
In
Out
Scart Out (Composite / RGB)
Composite
Video
Cb/Pb Y
Cr/Pr
Component
S-Video
Optical
Coaxial
Front
Surround
Centre
L
Video Out
Video Inputs From Sources
Video Inputs From Sources
4
45
6
5
6
123
1
23
IR10
AH10 Source equipment eg CD player
Detail of audio connections between
a tuner and AH10
Stereo RCA/phono leads
Side 1 connections of AH10
Detail of video connections between
a DVD player and VH10
75ohm video RCA/phono cable
Side 1 connections of VH10