Filter
Top Products
20
Operating instructions (continued)
8. Press the button to finish setting the alarm. 'Alarm set' will be displayed briefly
before the unit goes to standby mode.
Note: Preset 1 in the selected band will always be used, so make sure this is your
favourite early morning station.
Setting the sleep time
The sleep function will turn off the unit after a chosen time period has elapsed. It will
also generate a command on the trigger output which can, switch off any appropriately
connected Sonata source equipment.
To set the sleep time:
1. Press and hold the button on your remote control. The unit will display either
'Sleep On' or 'Sleep Off'. Rotate the Volume control or press the volume control on
the remote to change the mode.
2. Press the button to accept and advance to sleep countdown time.
3. The period of time before the unit switches off is displayed. Rotate the Volume
control or press the volume control on the remote to adjust the time.
4. Press the button to confirm the sleep time. 'Sleep set' will be displayed briefly
before the unit goes back to normal mode.
Note:Selectable time intervals for the sleep function are 15, 30, 45 and 60mins, then
it will be 30mins intervals thereafter with 12hrs being the maximum elapsed time.
The sleep function will always reset after it has been performed.
Setting the alarm
The alarm function can turn on the unit at a chosen time. When the alarm activates it
will either select the MP3 source and play your iPod, or select the tuner band of your
choice and preset 1 in that band.
To set the alarm time:
1. Press the button on your remote control. The unit will display either 'Alarm On' or
'Alarm Off'. Turn the Volume control or press the volume control on the remote to
change the mode if necessary.
2. Press the button to accept and progress to set the hour.
3. Turn the Volume control or press the volume control on the remote to alter the hour.
4. Press the button to accept and progress to set the minutes.
5. Turn the Volume control or press the volume control on the remote button to alter
the minutes.
6. Press the button to confirm the alarm time.
7. The unit will display the source it will automatically select when the alarm is
activated. For example, the Sonata DR30 will either display 'Wake MP3', 'Wake DAB'
or 'Wake FM'. Turn the Volume control or press the volume control on the remote
button to select your desired wake-up source.