Filter
Top Products
1) Turn the radio volume up to a gentle listening level. If the volume of
the radio is set too loud, the playback sound may be distorted.
2) Put a tape in and select the speed you want to record at.
3) Plug the 1/8” stereo patch cord into your radio
LINE OUT
or
headphone jack and the
LINE IN
of the VersaCorder. You can use
the red plugs of the included patch cord.
4) Press the
RECORD
and
PLAY
Buttons at the same time. The red
light will flash.
Adjust the volume on the VersaCorder to the level you want or turn the
volume off if you wish.
Note: If the Timer Switch is
ON
, normal recording won’t work. Make
sure the Timer Switch is
OFF
.
VersaCorder Page 9
Recording Instructions
How to Record From A Radio
The VersaCorder can be used with any radio that has a headphone jack
or
LINE OUT
. With the VersaCorder you can listen while recording.