C. Crane VersaCorder Dual Speed Recorder Stereo System User Manual


 
Page 14 VersaCorder
You can purchase a telephone patch cord and phone line splitter from
your C. Crane dealer or C. Crane Company at 800-522-8863
(www.ccrane.com).
1) Connect the dual tip end of your patch cord to the
phone
BEEP
and
MIC
input on the front of the
VersaCorder.
2) Connect the phone line splitter to your phone wall jack.
3) Connect your existing phone line to the splitter.
4) Connect the phone plug end of the patch cord into the splitter.
5) Set the VersaCorder to
QUARTER
speed for maximum record time.
6) Switch
VOICE ACTIVATED
to “
ON
”.
7) Press the
PLAY
and
RECORD
Buttons at the same time.
8) Set
SENSITIVITY
to number “2” and test to be sure the recorder
starts when someone is talking.
On the bottom of the VersaCorder there is a switch that will allow you to
insert a
BEEP
into your conversations at regular intervals. This will help
advise both parties they are being recorded and may be required by
law. Set the switch to
ON
to activate.
BEEP ON/OFF
SWITCH
Recording Instructions
Recording A Telephone Call
Note: It may be illegal to record a call without both parties knowl-
edge and consent. Please check with your local law enforcement for
details and advice. For important information, see pages 21 and 22.
Accessory: Telephone Patch Cord, Item Code:
VCP