Filter
Top Products
CONNECTING
ELECTRICAL POWER
1. Slide the USB/AUDIO-IN SWITCH on the back of the TRANSMITTER
to AUDIO IN.
2. Connect your audio source (iPod
®
player, CD player, TV) that will work with
a universal audio output, to the TRANSMITTER with the 3.5mm AUDIO/
HEADPHONE CABLE (included).
3. Connect the TRANSMITTER to the power source by plugging the USB end of
the USB/mini USB CABLE into the MINI USB JACK on the TRANSMITTER.
Plug the other end into the USB/AC ADAPTER.
4. Plug the USB/AC ADAPTER into a standard 110V wall outlet.
The TRANSMITTER’s power LED will illuminate.
USB POWER
1. Slide the USB/AUDIO-IN SWITCH on the back of the TRANSMITTER
to USB.
2. Connect the TRANSMITTER to your computer by plugging the mini USB
end of the USB/mini USB CABLE into the MINI USB JACK on the
TRANSMITTER and the other end into a USB port on your computer.
The TRANSMITTER’s power LED will illuminate.
PAIRING
You will need to pair the HEADPHONES and the TRANSMITTER the first time
you use them with an audio source.
1. Connect the TRANSMITTER to a power source. The TRANSMITTER’s power
LED will illuminate.
2. Push in and hold the CONNECT button on both the HEADPHONES and the
TRANSMITTER for 5 seconds, or until you hear a long beep. The CONNECT
button LED on the TRANSMITTER will blink fast while pairing.
3. Now connect the TRANSMITTER to an audio source and play an audio track.
Both the CONNECT button on the TRANSMITTER and the POWER button
on the HEADPHONES will illuminate solid.
4. When listening to this same audio source again, the HEADPHONES will
automatically pair with the TRANSMITTER connected to that audio source.
Note: The TRANSMITTER will work with only one set of HEADPHONES.
10
683417_INS_TV Headphones
_Size:5”Wx4.75”H_Output:100%_Prints:1/1,Blk