Filter
Top Products
8 – English
OPERATION
Remote control guide
Your Wave
®
music system remote will operate the
Multi-CD Changer. Just aim the remote at the front panel
and press the buttons. The remote normally works within
20 feet of the front panel.
The following diagram describes the buttons used for
playing CDs using the disc changer.
Note: Press-and-hold operations require holding the
button down for at least one second.
Note: Pressing RADIO, CD, or AUX automatically turns
on the Wave
®
music system to the source selected.
Seek/Track
• Press: Skips to next/previous CD track
on the current disc.
• Press and hold: Rapidly skips to next/
previous CD track on the current disc.
Tune/MP3
• Press: Navigates between folders
when playing MP3 CDs.
• Press and hold: Rapidly scans forward/
backward through a CD track.
Play/Pause
• Press: Plays the current CD.
• Press again: Pauses a playing CD.
Stop/Eject
• Press once: Stops playing the current CD
(page 10).
• Press again: Ejects the stopped CD.
• Press and hold: Ejects a playing CD.
Play Mode
• Selects CD play modes (page 10).
AUX
• Press to hear audio from an external
source connected to either the AUX 1 or
AUX 2 input on the changer (page 11).
• Press to switch between the AUX 1 and
AUX 2 input (page 11).
CD
• Press: Selects the CD source (page 10).
• Press again: Moves to the next disc
(page 10).
Seine_MDC_OG.book Page 8 Thursday, February 16, 2012 9:07 AM