Filter
Top Products
6 January 4, 2002 AM189930_01_V.pdf
Setting Up
Connect the power cord
1. Plug the small end of the power cord into the power jack on the back of your radio (see
Figure 3). Line up the flat edge of the plug with the flat edge on the side of the jack.
2. The FM antenna is built into the power cord. To improve FM reception, unwind the power
cord completely.
3. Plug the other end of the power cord into an electric outlet.
4. The display panel lights and the time display begins flashing after the power is connected.
Press the CLOCK SET button once to stop the flashing.
Figure 3
Connecting the power cord.
120V
~
AC
50/60Hz 50W
RL
AUX IN
VARIABLE OUT