Filter
Top Products
AM189930_01_V.pdf January 4, 2002 17
Other Components
Connection at Connection at
Component Cable component Wave
®
radio
Note
CD player, tape
deck, or VCR
Audio output jacks
If there are two sets of
outputs, use the fixed
outputs.
Recording from your Wave radio
is not recommended because
connections to the VARIABLE
OUT jacks shut off the radio
speakers, preventing you from
monitoring the recording volume.
One stereo audio
cable
AUX IN jacks
Television Audio output jacks
If there are two sets of
outputs, use the fixed
outputs.
AUX IN jacks To make sure the sound seems to
come from the screen, place the
Wave radio close to the TV.
To prevent interference with the TV
picture, do not place the Wave radio
directly on top of the TV.
25 to 100 foot stereo
cable with male-to-
male RCA plugs.
TAPE (REC) jacks
AUX IN jacks
Some Bose audio-input cables have
three connectors at each end. Use
only the two connectors that look
alike. DO NOT INSERT THE THIRD
CONNECTOR into the speaker’s
SYSTEM CONTROL jack.
Bose
®
Lifestyle
®
music system
Powered Bose
speakers
Speaker system input
as described in the
speaker owner’s
manual.
VARIABLE OUT jacks
TVs with stereo output
jacks need a standard
RCA cord.
TVs with single (mono)
audio output jacks use
a standard Y adapter.
TVs with earplug outlets
may need a special
earplug adapter.
Headphone jack (set
the headphone volume
control to 7).
Portable CD or
tape player
AUX IN jacks
One miniplug-to-
stereo audio cable
Using other components
Choose your CD player, tape player, or other auxiliary source by pressing the AUX key. Adjust
the listening volume with the VOLUME keys. Control all other functions at the source, referring
to its owner’s manual, if necessary. Control your auxiliary powered speakers from the Wave
radio. If these speakers have a volume control, you may use it.
®
Use the audio-input
cables that came with
your speakers.