Filter
Top Products
Operation
20 - English
Decreasing the bass
Depending on the placement of your Solo system or the program currently playing,
the audio may produce more bass than you would like.
To select the decreased bass setting
1. Point the remote at the system.
2. Press and hold the Mute button
until the following happens:
The system mutes the audio, plays three descending tones (going down) and
flashes the status indicator (page 19) amber three times. Audio returns and the
status indicator turns solid amber.
3. Release the Mute button.
To return to the normal bass setting
1. Point the remote at the system.
2. Press and hold the Mute button
until the following happens:
The system mutes the audio, plays three ascending tones (going up) and
flashes the status indicator (page 19) green three times. Audio returns and the
status indicator turns solid green.
3. Release the Mute button.
Optional universal remote control
A universal remote control is available from Bose that can operate this system and
be programmed to control your TV and other components connected to it. Contact
Bose Corporation or your local dealer for more information. See the contact list
included in the carton.
Using a third-party remote
A third-party remote, such as your set-top box remote, can be programmed to
control your Solo system.
Referring to the owner’s guide for your set-top box remote, follow the instructions
for programming the remote to control a TV. When it is time to enter a device code,
the owner’s guide for the cable remote should tell you what to enter for a Bose
system. Once programmed, the third-party remote should control basic functions
such as power on/off and volume.