Filter
Top Products
English – 15
SYSTEM SETUP
C. Place the Acoustimass
®
module according to the following guidelines:
• For best sound quality, stand the Acoustimass module on its feet along the same
wall as your TV, or along any other wall in the front third of the room.
• The front opening of the module can face any direction.
• Make sure there is an AC outlet nearby.
CAUTION:
Do not operate the Acoustimass module on its front end, back end, side, or top.
Note: Be sure to remove all protective films from the Acoustimass module before operating the
system. They may affect acoustic performance if left in place.
D. Plug the Acoustimass module power cord into an AC (mains) power outlet.
First time startup
What you need for the following steps:
Before you start:
• Do not connect any devices to the control console at this time. The instructions
provided on your TV will tell you when to do this.
• Make sure the speaker array and Acoustimass module are in their final positions
before performing the ADAPTiQ audio calibration.
Acoustimass module
Remote control ADAPTiQ
®
audio calibration headset
AA (IEC LR6)
batteries
HersheyP_Setup.book Page 15 Thursday, March 31, 2011 11:57 AM