Filter
Top Products
14 – English
SYSTEM SETUP
Step 3: Set up the Acoustimass
®
module
What you need for the following steps:
CAUTION: Choose a stable and level surface for the Acoustimass module. Vibration can
cause the speaker to move, particularly on smooth surfaces like marble, glass, or highly
polished wood.
A. When placing the Acoustimass
®
module on bare floors, or other smooth surfaces,
attach the included rubber feet to the bottom of the module for greater stability and
to protect your floor.
B. Plug the small end of the power cord into the Power connector.
Acoustimass module Power cordRubber feet
Bottom panel
Rubber foot
Power
For service use only
HersheyP_Setup.book Page 14 Thursday, March 31, 2011 11:57 AM