Filter
Top Products
3. Next, take the Ear Speaker(7) and attach it to the Velcro Pad. Run the
Microphone Arm down along down to where your mouth will be. As the
Microphone Arm is flexible, you can adjust it so it sits in the optimum position in
front of your mouth. Some helmets have removable padding; if yours does, it is
recommended to run the speaker and mic under the padding.
4. Taking care to match the
pins up, connect the
Headset Plug(9) to the
Headset Socket(5). The
plug can only be inserted
in one position.
5. Secure the cord of the Headset
Plug(9) inside the helmet. Tuck
any extra wire into the helmet.
Ensure that only few centimeters
of the cord comes out.
You have successfully mounted the InterPhone
Quick removal of the InterPhone
Remove the BlueAnt InterPhone by pushing down the lock
as shown and then take out the InterPhone Module in an
upward motion.
6