Filter
Top Products
45’
Installation
l
Confirm that Anti-Vibration
Switches on both left and
right sides are set to
position 45.
l
Attach brackets (L) and (R)
using the hexagonal bolts
(M5
x 8).
l
Attach brackets (L) and (R)
to their respective
brackets (B) using the
hexagonal bolts (M6 x
20)
and the hexagonal nuts
(M6).
I
I
l
Pull back the carpet and determine
where to attach the unit.
l
Stick the supplied double-sided tape
to the bottom of the brackets (B) and
peel off the paper backing.
l
Affix the unit to the floor by pressing
in place.
0
A
l
Using a knife, cut
Y’s
in the carpet
directly above the brackets (B) bolts.
l
Return the carpet to its original
position allowing the bolts to
protrude through.
Q
l
Remove the hexagonal nuts and
take off the changer.
e
l
Once more, use the hexagonal nuts
to attach the changer on top of the
carpet.
10