Filter
Top Products
6
Programming by Automatic Storing
Select the desired waveband with the AM/
FM button 9.
Press AS button 8 for at least 2 seconds
until the audio is briefly muted or beep is
heard (if beeps are turned on). Search tuning
starts. 'AS' appears in the display.
Search tuning during Auto-Store
After the Auto-Store process has finished,
the six strongest stations in this reception
area are stored. The radio will play the
station stored on preset 1.
If you have travelled beyond the range of the
stored stations, you may wish to repeat the
process again to store new strong stations.
To alternate between the AS radio stations
and your normally stored radio stations (on
FM1, FM2 or AM), briefly press the button
AS 8.
Whenever you are using the AM AS or the
FM AS bands, 'AS' will also be shown in the
display.
Station on FM AS Stored on Preset 4
Manual tuning
To tune-in stations of which the frequency is
known, press and hold one of the tuning
buttons TUNE> ; or <TUNE ;.
Fast tuning starts and will continue until you
release the button. During this operation the
radio is muted.
Briefly tap tuning button TUNE> ; or
<TUNE ; to move in steps of 9 kHz for AM
or 0.1 MHz for FM until the right frequency is
displayed.
Storing Stations
Storage locations for 30 stations are
available.
• 6 x FM1
• 6 x FM2
• 6 x AM
• 6 x FM AS
(Automatically-Stored FM stations)
• 6 x AM AS
(Automatically-Stored AM stations)
Storing a Radio Station into a
Preset
1. Select the required waveband, AM, FM1
or FM2 by button AM/FM 9.
2. Tune to the desired station by means of:
• Automatic seek tuning or
• Manual tuning
3. Press and hold the desired preset
buttons 1 to 6 (=) until the radio is
briefly muted or beep is heard (if beeps
are turned on), indicating that the chosen
radio station is stored into the preset.
During the storing process the currently
stored station is shown.
FM Station stored on Preset 1
The previously stored station is then
replaced and the selected preset number
'1 to 6' appears in the display.
4. Program the other preset buttons in the
same way.
5. Repeat the above mentioned operation
for the other wavebands AM, FM1 and
FM2.
Automatic Storing (AS)
This feature allows the storage of an extra 6
AM and 6 FM radio stations. It is of great
benefit when away from the home location,
as the strongest radio stations can be
stored without knowing their frequency, and
does not delete the stations already stored
on FM1, FM2 or AM bands.
P1 101.4
AS 103.7
AS
P4 103.7
AS