Filter
Top Products
13259 0303
10
5. Status indicators - Displays current status of the receivers audio processor. Indicators have been supplied to
show when the DSP is decoding Dolby Digital ‘2 Digital’, Dolby Pro Logic ‘2 Pro Logic’, or DTS audio. There
is an indicator to show the input to the S/PDIF digital receiver is 96kHz 24 bit data ‘96/24’ or an analog input that
is being sampled using 96kHz/24bits. Finally, there is an indicator to show processed audio is sourced from the
selected analog input ‘Analog’. See MODE OPERATION
6. Display - The receiver display is a 16 character alphanumeric fluorescent display. Displays current status of
receiver and any changes being performed.