Filter
Top Products
Operation 49
PICTURE menu
Some picture adjustments are available only when certain input sources are in use.
Unavailable adjustments are not shown on the screen.
FUNCTION
(default setting /
value)
DESCRIPTION
Picture Mode
(PC/DVI-A/DVI-
D: Dynamic;
YPbPr/ S-Video/
Video:
Standard)
Pre-defined picture modes are provided so you can optimize your
projector image set-up to suit your program type. See "Selecting a picture
mode" on page 35 for details.
Reference
Mode
Selects an picture mode that most suits your need for the image quality
and further fine-tune the image based on the selections listed on the same
page below. See "Setting the User 1/User 2 mode" on page 36 for details.
Brightness
Adjusts the brightness of the image. See "Adjusting Brightness" on page 36
for details.
Contrast
Adjusts the degree of difference between dark and light in the image. See
"Adjusting Contrast" on page 36 for details.
Color
(0)
Adjusts the color saturation level -- the amount of each color in a video
image. See "Adjusting Color" on page 37 for details.
Tint
(0)
Adjusts the red and green color tones of the image. See "Adjusting Tint"
on page 37 for details.
Sharpness
(15)
Adjusts the image to make it look sharper or softer. See "Adjusting
Sharpness" on page 37 for details.
Brilliant
Color
(On)
See "Adjusting Brilliant Color" on page 37 for details.
When Brilliant Color is set to Off, the color temperature adjustment
will not function.
Color
Temperature
(T3)
There are four color temperature settings are available. See "Selecting a
color temperature" on page 37 for details.
3D Color
Management
See "3D Color Management" on page 38 for details.
Save
Settings
Saves the settings made for User 1 or User 2 mode.