Filter
Top Products
Documentation Number TCDA0997 Manual 13
B&B Electronics -- PO Box 1040 -- Ottawa, IL 61350
PH (815) 433-5100 -- FAX (815) 433-5104
Chapter 6: Software
Included with the TCDA module is a diskette with software
examples written in Borland C++, Borland Pascal and Microsoft®
QuickBASIC v4.5. These DOS-based example program show how
to access the TCDA module connected to the following modules:
• 232SDA10
• 232SDA12
• 232SPDA
• 232SPDACL
• 485SDA10
• 485SDA12
• 485SPDA
• 485SPDACL
• ADIO12
Installation
To install the example files on your hard drive:
• Place the disk in drive A.
• Type A: and press the <ENTER> key.
• Type INSTALL and press the <ENTER> key.
• Follow the instructions given by the program.
After the software installation is complete, the file, FILES.LST,
contains a list of installed files with a brief description of each. The
file, HISTORY.LST, contains a description of each revision to the
software files. The file, READ.ME, contains corrections and
additions to the printed documentation. The file, MAKEIT.BAT, in the
subdirectory for each module is an example of how to compile and
link the example program in each language. This file may need to be
modified to use the path to your compiler.