Filter
Top Products
6
1. With the top side
of the buckle facing
up (see figure 4), lace
the strap through the
mounting base as
illustrated in figure 5.
2. After the strap is com-
pletely laced through
the mounting base,
make a loop with the
strap, where it runs
across the middle of
the base as illustrated
in figure 6. This loop
is necessary to access
the two mounting
holes in the base.
MOUNTING THE BAZOOKA
Bottom
Top
Figure 4
Figure 5
Figure 6
WIRING DIAGRAM
9
When using high level inputs, take the time after you make all wiring
connections to run through the AM I IN PHASE? procedure of this manual
to confirm that your inputs are in correct electrical phase and the proper
bass response is being produced.