Filter
Top Products
1. Backup Agent Plug-in Installation
1.6 Setting of “Backup Agent” service
What has to be done?
The setting of the "Backup agent" service consists in setting the parameters for FTP backup and validate a backup scheduling.
Workflow
1. Shutdown the server with the normal proc edure.
2. Press the power button on the front panel and keep down the "Shift" key on the keyboard during the server startup.
3. It takes a few minutes for the server to finish its startup phase (starting the operating system, verification of hard disks, applications
launching) and the XP login window is displayed.
4. Use a “support” login and its ass ociated password to log in a administrative Windows account (access to start button is needed).
Contact your techn ical s upport if you don’t have this information.
5. Click on Start Menu> Programs> Applications> B arco TMS-100> Backup Agent.
6. This will start the “Backup Agent” user interface.
Image 1-1
7. Select the “Configuration” tab.
Image 1-2
8. Configure FTP settings that will allow to the application to do the backups o n the FTP server of yo ur choice:
- Host: IP address of the FTP server w here y ou want to store the backup file.
- Username: User name of the FTP serv
er.
- Password: Password of the FTP server.
- Path: FTP virtual path wher e you want to store the backup file.
In this panel, you can also change some minor behavior of the application. For further details see the appendix at the end of the
document. See "Details of the Configuration tab", page 7 .
9. Push on “Save” button. After a few min
utes the com munication is established with the FTP s erver: "FTP Status" bec omes
"WorkCorrectly".
10.Select the “Backup Schedule” tab.
R59770810 BACKUP AGENT PLUG-IN 06/11/2012
3