Barco PGWU-62L Home Theater System User Manual


 
45
PGWX-62L/PGWU-62L/PGWX-62L-K/PGWU-62L-K - - 2015/07/27
6. Maintenance & Service
6.1 Replacing the Lens
6. MAINTENANCE & SERVICE
Overview
Replacing the Lens y
Turn the projector off and unplug the power cord. 1.
1
Allow the projector to cool down for at least 1 minute then start the lens replacement. 2.
2
Remove the lens cover from the projector. 3.
3
Rotate the bar upwards and then rotate the lens counterclockwise to remove it from the projector. 4.
4
Replace the lens to be installed, be sure the label “5. TOP” of lens is upward and then push the lens into the
position.
5
Rotate the lens clockwise to lock the lens and then rotate the bar downwards. 6.
6
Put the lens cover to the projector with the sound “click”. 7.
7
Procedure:
VGA-OUT VGA-IN
LAN RS-232 12V
OUT
5V
OUT
CVBS
HDMI
DVI
Enter
Menu
1 2
6
7
3 4
Warning: This procedure may only be performed by qualied technical service personnel.
Caution: Do not transport the projector with any lens installed.
Note: Please verify that all the plastic caps removed from the lens prior inserting in the projector.
5