Filter
Top Products
7
Thank you for choosing a B-52 sound product. B-52 manufactures some of the world’s best sounding and
most reliable professional speaker systems, amplifiers and components. E.T.I. Sound Systems, Inc., makers of
B-52, takes great pride in thoroughly testing each B-52 product prior to shipment.
B-52 CABINETS: E.T.I. Sound Systems, Inc. offers a LIFETIME
warranty (effective on or after January 1,
2002) to the original purchaser that B-52's cabinet construction will be free from defects in material and
workmanship. A dated sales receipt will establish coverage under this warranty. This warranty does not
cover service or parts to repair damage caused by neglect, abuse, normal wear and tear and cosmetic
appearance to the cabinetry not directly attributed to defects in materials or workmanship. Also excluded
from coverage are damages caused directly or indirectly due to any service, repair(s), or modifications of
the cabinet which has not been authorized or approved by ETI Sound Systems, Inc. If this product is defec-
tive in materials or workmanship as war
ranted above, your sole r
emedy shall be r
epair or replacement as
provided above. IMPORTANT: The included MATRIX-200 suitcase does not constitute a cabinet under this
warranty. The suitcase is covered by a 90-DAY warranty against manufacturing defects.
LOUDSPEAKER AND MID-RANGE COMPONENTS: E.T.I. Sound Systems, Inc. warrants the original pur-
chaser that B-52 low and mid-frequency loudspeaker units will be free from defects in materials and work-
manship for a period of (5) FIVE YEARS fr
om the original purchase date (effective on or after January 1,
2002). A dated sales receipt will establish coverage under this warranty. This warranty will automatically
terminate (5) years after the original retail sales date. This (5) five-year warranty does not cover service or
parts to repair damage caused by accident, disaster, misuse, abuse, burnt voice-coils, over-powering, neg-
ligence, inadequate packing or shipping pr
ocedur
es and service, repair or modifications of the component
which has not been authorized or appr
oved by E.T
.I.. This war
ranty is in lieu of all other expr
essed war-
ranties. If this product is defective in materials or workmanship as warranted above, your sole remedy shall
be repair or replacement as provided above.
HIGH-FREQUENCY DEVICES: E.T
.I. Sound Systems, Inc. of
fers a
LIFETIME
warranty (effective on or after
January 1, 2002) to the original purchaser that B-52 high frequency (tweeters) devices will be free from
defects in material and workmanship. A dated sales receipt will establish coverage under this warranty.
This war
ranty does not war
ranty neglect or abuse.
THE W
ARRANTY DOES NOT COVER NEGLECT OR
PRODUCT ABUSE.
The lifetime warranty on high-frequency devices does not cover service or parts to repair
damage caused by accident, disaster
, misuse, abuse, negligence, inadequate packing or shipping pr
oce
-
dures or service, repair or modifications of the product which has not been authorized or approved by
E.T
.I. This war
ranty is in lieu of all other expressed warranties. If this product is defective in materials or
workmanship as warranted above, your sole remedy shall be repair or replacement as provided above.
AMPLIFIERS: E.T.I. Sound Systems, Inc. warrants the original purchaser that B-52 amplifiers will be free
fr
om defects in material and workmanship for a period of
(2) TWO YEARS
from the original purchase date
(effective on or after January 1, 2002). A dated sales receipt will establish coverage under this warranty.
This warranty will automatically terminate (2) years after the original retail sales date. This (2) two-year
warranty does not cover service or parts to repair damage caused by accident, disaster, misuse, abuse,
over-powering, negligence, inadequate packing or shipping procedures and service, repair or modifica-
tions of the amplifier which has not been authorized or approved by E.T.I.. This warranty is in lieu of all
other expressed warranties. If this product is defective in materials or workmanship as warranted above,
your sole remedy shall be repair or replacement as provided above.
RETURN PROCEDURES: In the event repair or part replacement becomes necessary, follow the procedure(s)
outlined below. Defective products must be shipped, together with
proof of purchase, freight pre-paid
and insured to the Authorized B-52 Dealer from whom you purchased the product or directly to E.T.I. Sound
Systems. If a product must be returned to E.T.I. Sound Systems for warranty replacement/repair, a
Return Authorization Number must be obtained from our Customer Service Department prior to shipping
the product.
NEVER RETURN THE ENTIRE CABINET
__
JUST THE DEFECTIVE COMPONENT: Identify and remove the
defective component. If you are uncertain which component is defective, or need directions for removing a
component, please contact our Customer Service Department for assistance. Components which are a part
of an original B-52 speaker box must be sent directly to E.T.I. Products must be shipped in the original
packaging or its equivalent; in any case, the risk of loss or damage in transit is to be bor
ne by the
purchaser. The Return Authorization Number must appear in large print directly below the shipping
address. Always include a brief description of the defect, along with your correct return address and
telephone number. When calling to inquire about a returned product, always refer to the Return
Authorization Number
. If E.T
.I. deter
mines that the unit was defective in materials or workmanship at any
time during the war
ranty period, E.T
.I. has the option of r
epairing or r
eplacing the pr
oduct at no additional
charge, except as set forth below. All replaced parts become a property of E.T.I. Products replaced or
repaired under this warranty will be returned via ground-shipping-within the United States-freight prepaid.
E.T.I. is not responsible for costs associated with expedited shipping, either to E.T.I. or the return of the
pr
oduct to the customer
.
INCIDENTAL OR CONSEQUENTIAL DAMAGE:
In no event will E.T.I. be liable for any incidental or conse-
quential damages arising out of the use or inability to use of any B-52 product, even if E.T.I. or a B-52
dealer has been advised of the possibility of such damages, or any other claim by any other party. Some
states do not allow the exclusion or limitation of consequential damages, so the above limitation and exclu-
sion may not apply to you. This war
ranty gives you specific legal rights and you may also have other rights
which may var
y fr
om state to state.
FOR YOUR PROTECTION: Please complete and mail the Purchase Information Card within (10) ten days
of the date of purchase so that we may contact you directly in the event a safety notification issued in accor-
dance with the 1972 Consumer Pr
oduct Safety Act. In addition, we ask that you complete the brief ques
-
tionnaire so me may analyze your answers and in this way, help us evaluate our customer needs.
CUSTOMER SERVICE: Our dedicated staff is ready to help you with any B-52 warrant or product ques-
tions you may have. Please call 323-277-4100 (9:00AM to 4:00PM Pacific Standard Time).
E.T.I. Sound Systems, INC.
3383 Gage Ave., Huntington Park, CA, 90255
Warranty valid ONLY to original purchaser with PROOF OF PURCHASE.
Y-CABLE SET-UP FOR PATCH SECTION
1/4” Stereo Jack
Tip
Rin
g
Sleeve
MONO/RING
MONO/TIP
RING
TIP
1/4
”
1/4”
A tip, ring, sleeve Y-cable used in the patched section of the MATRIX-200 allows you to
insert external devices and improve the performance of the system. This Y-cable is
needed in the insert and effects sections. Please refer to the wiring plan above.
Insert (Left and Right), refer to #19 on page 4:
TIP: Input of the MATRIX-200; connects to the output of the external device.
RING: Output of the MATRIX-200; connects to the input of the external device.
Effects (Left and Right), refer to #20 on page 4:
TIP: Input of the MATRIX-200; connects the output of the external processor.
RING: Output of the MATRIX-200; connects to the input of the external processor.
FOOTSWITCH:
TIP: Controls effects. RING: Controls (mutes) outputs
MATRIX-200 INPUT PLATES
This input plate is located on the rear of the two satellite speakers.
The input connector is for a 1/4” male connector.
Limited Warranty