Filter
Top Products
2
Important Safety Instructions / Features .......................................................................2
Product Features / Precautions.....................................................................................3
Amplifier and Mixer Descriptions .................................................................................4
Set-up & Warranty Information ....................................................................................5-7
Contact Information .....................................................................................................8
1) Read these instructions.
2) Follow all instructions
3) Keep these instructions
4) Heed all warnings
5)
Do not use the MATRIX-200 near water. Be
extra cautious when moving the system
during rain or while transporting the system
over wet surfaces as water might splash on to
the amplifier. To reduce the risk of fire or
electric shock, do not expose the system to
rain or moisture.
6)
Clean only with dry cloth.
7)
Do not block any ventilation openings. Use
in accordance with manufacturer’s instructions.
8) Do not use near heat sources such as
radiators, stoves or other devices that may
produce heat.
9) Do not defeat the safety purpose of the
polarization or grounding-type plug. A
polarized plug has two blades with one wider
than the other. A grounding-type plug has two
blades and a third grounding prong. The wide
blade or the third prong is provided for your
safety. If the provided plug does not fit your
outlet, consult an electrician for replacement
of the obsolete outlet.
10)
Protect the power cord from being walked on
or pinched, particularly at the plug and at the
point where it exits the MA
TRIX-200 amplifier
.
11) Only use attachments / accessories
recommended by B-52 Pro-Audio.
12) Use caution when transporting the system to
avoid injury from tip-over.
13) Unplug the MATRIX-200 during lightning
storms or when not in use.
14) Refer all servicing to qualified personnel.
Servicing is required when the MATRIX-200
has been damaged in any way, such as the
power-cord or plug is damaged, liquid has
been spilled into the cabinets, the unit has
been exposed to moisture or rain, does not
operate normally, or has been dropped.
15) The MATRIX-200 is not intended for outdoor
fixed installations or in high moisture areas.
Moisture can damage the speakers and can
cause corrosion of electrical contacts. Keep
speakers out of extended or intense direct
sunlight.
The speaker surfaces may fade and
be damaged by long-term exposure to intense
ultra-violent light.
IMPORTANT SAFETY INFORMATION
CAUTIONCAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
HEED ALL WARNINGS
WARNING: To reduce the risk or fire or elec-
trical shock do not expose this equipment to
rain or moisture.
CAUTION: Connect the power cable only after you have made absolutely
sure the local mains voltage matches the voltage specified on the device.
If you connect to the wrong voltage, you may destroy the electronic
components of the MATRIX-200 system.
• Output stage with discrete devices, not integrated
IC amps
• Output power of 2 x 100w RMS with significant
headroom for peaks
• Comprehensive amplifier and speaker protection
circuitry to guard against short circuits, DC
offsets, over-heating, turn-on thumps, subsonic
and supersonic frequencies.
• Built-in stereo clip limiter
• Equalization customized to enhance and optimize
speaker system performance
• Output for stereo headphones on rear panel
• Very efficient cooling, utilizing a large heatsink
and two direct flow fans
• Power supply with low-noise torodial transformer
and a dual voltage (115/230Vac) selector switch
• Four channels with both balanced XLR mic inputs
and unbalanced 1/4” jack line level inputs
n
15Vdc phantom power on balanced XLR
inputs for condenser micr
ophones
n
Independant P
AN, TONE and EFFECT LEVEL
contr
ols on each channel
•
One ster
eo channel for variety of sour
ces:
n
1/4” TRS-style Stereo Phone Jack
n
3.5mm Stereo Jack for MP3 / CD players
n
Dedicated mono 1/4” Jack INSTRUMENT
input with fr
equency r
esponse contoured
for acoustical instr
uments
•Low distortion, low noise circuitry
• PLAYBACK input/output RCA connectors with
LEVEL control
•
PATCH section to connect optional external
pr
ocessors, exter
nal ef
fects and foot switch
•
3-band MASTER EQ section
•
XLR
output for exter
nal subwoofer
.
• Sub switch not only engages low
frequency output but also removes deep bass
from satellites thus increasing dynamic range
and lowering overall system distor
tion
•
Eight built-in high quality DSP effects
n
Level contr
ol to mix pr
ocessed signal with
main signal
n
INPUT/MASTER switch to r
oute ef
fects to
either Master section or to individual
channels
• Sophisticated mixer topology allows the
combination of external effect devices to be
used in combination with internal DSP
• Dual 6.5” drivers optimized for D’Appolito
(mirrored woofers) configuration
• 1” exit phenolic tweeter on exponential horn
ideally matches dual 6.5” speakers
Dimensions: 20” (W) x 32“ (H) x 15” (D)
Weight: 80 (lbs)
Stereo Power Amplifier features
5-Channel Mixer features
Built-in DSP Effects
Loudspeakers
Complete system
Note: Specifications ar
e subject to change without notice
INSIDE THIS INSTRUCTION MANUAL