Filter
Top Products
Controls and
Operation
The Ayre MX-R has a front-panel button for conventional
stand-alone operation. The amplifier may also may be controlled
by other linked components via the AyreLink communication
system. Alternatively the AyreLink port may be used to accept a
trigger signal from another component, thereby controlling the
amplifier’s operating state.
Status LED and Standby Button
There is a status LED on the amplifier’s front panel that
indicates the operational status of the unit.
The status LED on the front panel is also the
standby button. Pressing this button selects
between the “Standby” and “Operate” modes.
Green = Standby
Blue = Operate
When the amplifier is first connected to AC power, the status
LED will glow green, indicating that the unit is in “Standby”
mode. When the listener presses the front-panel button, the
unit changes to “Operate” mode and the indicator light glows
blue.
7