Filter
Top Products
After correcting the suspected fault condition, a press of the
front-panel button is required to return the unit to the green
“Standby” condition.
If the amplifier is linked to an
AyreLink-equipped preamplifier with an
alpha-numeric display, a message indicating that
the proper amplifier operation has been restored
will be displayed on the front panel of the
preamplifier.
A second press of the button will restore the unit to the blue
“Operate” mode.
If the amplifier is linked to an
AyreLink-equipped preamplifier with an
alpha-numeric display, restoring operation of the
amplifier will clear any messages displayed on the
front panel of the preamplifier. (Messages may
also be cleared by placing the preamplifier in
“Standby”.)
If the fault is still present when the front-panel button is
pressed the second time, the unit will immediately revert to the
red “DC Offset” mode.
Status LED Summary
Green Standby – The amplifier is ready to enter “Operate” mode.
Blue Operate – The amplifier is available for music playback.
Orange Over Temperature – The amplifier has exceeded its safe
operating temperature due to poor ventilation and/or excessive
19