Filter
Top Products
8
2.2 Installing the Grilles
The grille assemblies are behind a panel on the outside of the speaker crate. Remove the
screws securing the panel, and then carefully pull the grilles straight out. The grilles are
installed with friction fasteners and press into place on the speaker cabinets. Please see Figure
2.2.
Orientation of the Felt Anti-Diffraction Mask
The grille assembly includes a felt anti-diffraction mask. Should the felt mask be removed, be
sure to note the correct inside-outside orientation when re-installing it. The tweeter and
midrange openings are beveled on the side that faces the listener (away from the speaker).
Figure 2.2 - To install the grille assemblies.
1. Remove screwsand panel fromtop of crate.2. Pull grillesstraight out.3. Push grille pins straightinto grille pin sockets.