Filter
Top Products
10
4. Carefully pull the grille cloth away from the frame mounting hole. The mounting hole
must be clear of all obstacles during pin installation.
5. Place the exposed end of the grille pin in the open mounting hole. Check to insure that the
grille cloth is not trapped between the pin and frame. Use a small hammer and gently tap the
new grille pin in place. Then, pull the insertion tool off the new pin and verify that the pin
flange is flush with the surface of the grille. Please refer to Figure 2.6.
WARNING: Grille pin breakage may result if the grille cloth becomes trapped between
the pin and frame during installation.
6. Reposition the grille cloth that was pulled away from the frame mounting hole in step 4.
The cloth should lay flat and wrinkle-free.
Figure 2.6 - Installing grille pin into Opus Ceramic grille frame. Note that after
installation, the grille pin flange is flush with the surface of the grille.