Audiovox SIRPNP3 Satellite Radio User Manual


 
128-7193A
7 of 32
-7-
Encoder Knob and Select Button:
The Encoder knob is the primary control for navigating
through the various lists and option menus available on
the unit. In the default mode, the Encoder knob provides
sequential tuning through the available program chan-
nels. Clockwise (CW) rotation tunes up one channel-
per-detent, while Counterclockwise (CCW) rotation tunes
down one channel-per-detent. When in the list or menu
mode, turning the Encoder knob CCW and CW scrolls
down and up, respectively, through the various menus
and lists. The current selection from the list will be high-
lighted on the display. When the item is highlighted, press
the Encoder knob (Select Button) to enter the selection.
Pressing and holding the Encoder knob will tune to the
previously selected channel.
Category Buttons:
The Up or Down category buttons allows the user to ad-
vance through the channel groups based on content
category. By turning the rotary Encoder knob, the user
can then scroll up or down through the channels within
that category. Once a choice has been made, it can be
entered by pressing the Select Button.
Memory (MEMO) Button (s-seek) Function):
This feature allows the user to capture and store the cur-
rent program data information (Channel Name & Num-
ber/Artist & Song title). You can store up to 24 Artist/Song
Title combinations. The Shuttle also has the capability to
search the current incoming Sirius signal, and thereby
alert you if it matches the Artist/Song title stored in Shuttle
memory.
Display (DISP) Button:
This button allows the user to choose one of several ways
of presenting the Channel Name, Artist and Song title
information on the LCD screen.
Menu (MENU) Button:
The MENU Button is used to access “Menu Options” which
displays the user setup menu, plus other feature/function
adjustments.
BAND Button (BAND)/Preset Tune (p.tune):
Each momentary press of the BAND Button allows the
user to switch between 3 bands of Channel presets (10
presets each A, B and C). Pressing and holding the BAND
Button for 2 seconds initiates preset tuning (accompa-
nied by a beep confirmation tone) that will display and
tune all stored preset channels in sequence. This is
indicated by the reverse image of the channel number