Filter
Top Products
128-7193A
25 of 32
-25-
Program Alert On/Off:
Rotate the Encoder knob to toggle between
Program Alert On or Program Alert Off.
When the desired alert status is high
lighted, press the Encoder knob.
Auto Shutdown
In this mode, you have the option of programming the unit
to automatically shut off after a 1-hour period without any
user intervention. After 59 minutes of inactivity, a beep tone
sounds, and a display prompt appears on the screen,
stating Cancel Auto Shutdown. Press the Encoder knob
to terminate the function temporarily.
Rotate the Encoder knob to toggle between
Enabled and Disabled. When the desired shut
down status is highlighted, press the Encoder
knob.
increase (CW) or decrease (CCW) to se
lect the desired day from the default value
(Monday).
Channel:
Rotate the Encoder knob to scroll through a
listing of all the Sirius streams in a circular
motion. The listing should encompass all 5
available lines. When the desired channel is
highlighted,press the Encoder knob.
NOTE: This function is especially useful when the
shuttle is being powered by bat-
tery (Car etc.).
The following options are available in this mode:
Enabled
Disabled (Default)
Sleep Mode:
In this mode, you have the capability of program
mingthe unit to shut off after a selected period of
time. The screen displays Sleep Mode on the top
line, with optional time settings as follows:
Sleep Off (Factory Default)
15 minute
30 minute
45 minute
60 minute