Filter
Top Products
128-7193A
21 of 32
-21-
1.Press the MENU button to access the User
Menu.
2.Rotate the Encoder knob to select the
“Lock Options”.
3.Press the Encoder knob.
4.Rotate the Encoder knob to highlight “Edit Code”.
5.Press the Encoder knob.
6.Enter the default code “0000”.
7.The “New Code” prompt will appear. Enter your
newfour digit code using the 0-9 number buttons.
You will then be prompted to confirm the new
code by entering your code again.
8.The lock code is now changed.
Edit Code
Upon entering this mode, the user is prompted to
enter the current four digit numerical code being used
to lock/unlock channel access. Once the correct code
has been entered, the user is prompted to enter the
new 4-digit code twice. The second entry is requested
for confirmation.
Audio Level Options
Upon entering this mode, a 10 segment horizontal bar
graph is displayed with a “-“ sign to the left and a “+” sign
to the right. The current setting is indicated on the bar
graph. Rotating the Encoder knob will adjust the bar
graph audio level indication and audio gain, accordingly.
To select and exit this function, press the Encoder knob.
No button activity for 10 seconds will also exit this func-
tion.
Antenna Aiming (Home Installation)
Upon entering this mode, two 10 segment horizontal
bar graphs are displayed with a “-“ sign to the left and a
“+” sign to the right. The satellite signal strength is dis-
played by the SAT graph. The terrestrial signal strength
is displayed by the TER graph. Position the antenna to
optimize either the satellite or terrestrial signal. The current
setting is indicated on the bar graph. Moving the antenna
location adjusts the bar graphs signal strength, represented
by the filled-in bar graph squares, thus ensuring optimum
reception. To exit this function, press the Select Button.
NOTE: Terrestrial repeaters are typically used in large
urban areas where structures may affect the line
of sight satellite signal. Terrestrial signals (TER)
may not be available in your geographic location.