Filter
Top Products
-9-
SETTING THE CLOCK
1. Switch the vehicle ignition on and the radio on (radio frequency or disc track number will be shown on the display
panel).
2. Press and hold the Time/Frequency (T/F) button approximately 2 seconds until the time display appears with AM or
PM and the colon ( : ) flashing. Release the T/F button.
3. Press the Down Tuning button ( ) to adjust the hours and the AM/PM indication, and the Up Tuning button ( ) to adjust
the minutes to the correct time.
4. When the correct time is shown on the display panel, wait 5 seconds for the display to return to the normal indication.
CD PLAYER ERROR CODES
If a problem should develop while operating the CD player, the following error codes may be displayed on the display panel:
INF-1: Indicates mechanical malfunction. Press the Reset button
dn
.
INF-2: Indicates mechanical malfunction. Press the Reset button
dn
.
INF-3: Indicates mechanical malfunction. Press the Reset button
dn
.
INF-4: Indicates disc focus error. Press the Reset button
dn
.
INF-5: Indicates disc focus error. Press the Reset button
dn
.
INF-6: Indicates mechanical malfunction. Press the Reset button
dn
.
INF-7: Indicates data error. Press the Reset button
dn
.
INF-8: Indicates disc reading error. Eject the disc, make sure it is clean, undamaged, and loaded correctly (label side up). Re-
load the disc and check for proper operation or try another disc.
INF-9: Indicates disc lever error. Press eject button.
If the suggested measures do not solve the problem, contact an approved warranty station near you for further assistance.