Filter
Top Products
-5-
NOTE: It is a characteristic of LCD panels that, if subjected to cold
temperatures for an extended period of time, they may
take longer to illuminate than under normal conditions. In
addition, the visibility of the numbers on the LCD may
slightly decrease. The LCD readout will return to normal
when the temperature increases to a normal range.
bq FUNCTION DISPLAY
The Function Display consists of a single bar graph which displays a
bar graph which provides a visual representation of the audio signal
power level. As the volume is increased, the number of illuminated
segments will increase.
br DISC SLOT
With the label surface facing up, gently insert each disc into the slot
until the soft-loading mechanism engages and draws the disc into the
player. The number of discs loaded will appear both on the front panel
display disc icon (flashing white segment) and on the DISC INF display on the
rear of the front panel. The discs will be loaded in order beginning with the
number (1-5) currently displayed. Disc play will begin when the CDC button is
pressed; and play will start with track 1 on the last disc loaded, unless another
disc is selected using the DISC SEL button on the front side of the
panel.
NOTE: This unit is designed for play of standard 5" (12cm) Compact
Discs
ONLY. Do not attempt to use 3" (8cm) CD-Singles in this
unit, either with or without an adapter, as damage to the
player and/or disc can occur. Such damage will not be
covered by the Warranty on this product.
bs CD PLAY/PAUSE SELECTOR (CDC/ II )
When listening to radio with a disc loaded in the unit ( on the
display panel), press this button to return to disc play mode from the
beginning of the last track in play.
3
4
2
1
5
LOC will appear on the display as tuning occurs. If you have already
set the pre-set memories of that band to your favorite stations, activating
the Auto-Store Tuning feature will erase those stations and enter the
new stronger stations. This feature is most useful when traveling in a
new area where you are not familiar with the local stations.
bn STATION PRE-SET MEMORIES
To manually set any of the 6 pre-set memory buttons, use the follow-
ing procedure:
1. Turn the unit on and select the desired band.
2.Select the first station to be pre-set using the TUNE/TRK
buttons.
3.Press and hold the pre-set button to be set for approximately
2 seconds.The pre-set number CH 1-6 will appear on the
display, indicating the station is now set into the memory position
of that pre-set button and can be recalled at any time by
momentarily pressing that button.
4.Repeat the above procedure for the remaining 5 pre-sets
on the band in use and for the other 4 bands of the unit.
bo FM STEREO/MONO/LOCAL (LOC) INDICATIONS
The unit receives both stereo and monaural signals. During FM radio
operation, the unit is usually receiving a stereo signal as indicated by
the stereo icon ( ) on the display. If a stereo signal is too weak for
comfortable listening, the stereo indication will appear intermittently or
not at all; if an AM or monaural signal is received, the
icon will
disappear from the display panel.
bp LIQUID CRYSTAL DISPLAY PANEL
The Liquid Crystal Display (LCD) panel displays the frequency, time,
and activated functions.