Filter
Top Products
-6-
During disc play, press this button to temporarily stop play of the disc
(PAUS will appear on the display panel). Press the button again to
resume play from the point at which it was stopped. Pause mode will
also be canceled by activating any other disc function.
bt TRACK (TRK) SELECT ( / )
The Track Select functions are used to quickly access the beginning
of a particular track. Each time the Forward Track Select ( ) button
is pressed, the next higher track number will be selected as shown
on the display panel. Similarly, each time the Backward Track Select
( ) button is pressed, the next lower track number will be selected
as shown on the display panel.
bu CUE/REVIEW FUNCTIONS ( / )
High-speed audible search to any section of the disc can be made
by the Cue and Review functions. Press and hold the Cue button
( ) to advance rapidly in the forward direction or the Review button
( ) to advance rapidly in the backward direction. During either func-
tion, the elapsed time within each track will automatically be shown on
the display panel.
cl TRACK SCAN SELECTOR (SCN)
During disc play, press this button to play the first 10 seconds of each
track on the disc (SCN will appear on the display panel and the track
number will flash). When a desired track is reached, press the Track
Scan button again to cancel the function and play of the selected track
will continue. Track Scan mode will also be canceled by activating the
Repeat Play or Random Play functions.
cm TRACK REPEAT PLAY SELECTOR (RPT)
During disc play, press this button to repeat the play of the selected
track (RPT will appear on the display panel). Play of the track will
continue to repeat until the button is pressed again and the RPT indi-
cation disappears from the display panel. Repeat Play mode will also
be canceled by activating the Track Scan or Random Play
functions.
cn REPEAT A - B SELECTOR (RPT A-B)
The Repeat A - B function is used to select a section of the disc other
than a complete track to be repeated. Press the button at the begin-
ning of the section that you wish to have repeated (RPT and A will
appear on the display panel). Allow the disc to play to the end of the
section that you wish to have repeated and then press the button
again (the A on the display panel will change to a b). The selected
section will be played repeatedly until the function is canceled by press-
ing the RPT A-B button again or activating any other disc function.
co RANDOM PLAY SELECTOR (RDM)
During disc play, press this button to play the tracks on the disc in a
random shuffled order (RDM will appear on the display panel). In Ran-
dom Play mode, the Forward Track Select ( ) will also
select tracks in the random order instead of the normal progression. Back-
ward Track Select ( ) will go back to the beginning of the track in play
if it has played longer than 5 seconds or to a random track if it has
played less than 5 seconds. The Random Play mode can be can-
celed by pressing the button again (RDM indication will disappear from
the display panel).
cp MEMORY/CLEAR SELECTOR (MEM/CLR)
Up to 18 tracks can be programmed for play in any order you select.
The following procedure is used to program the order of track play:
1. Select a disc into the unit to begin disc play.
2. Select the first track to be programmed using the Track Select
buttons (TUNE/TRK) and press the MEMory Selector button. The
indication M - 01 will momentarily appear on the display panel,
indicating that the selected track has been entered as the first
one to be played in Programmed Play mode.
3. Select the second track to be programmed (this could be on
another disc) using the Track Select button and then press the
Memory Selector button. M -02 will appear on the display The
selected track has been entered as the second one to be played
in Programmed Play mode.