Filter
Top Products
-7-
6. Repeat step 1, except set the desired fade (FAD) ratio
between the front and rear speakers for the current
broadcast, and set this level using the VOL / buttons.
While FAD is displayed, press and hold the P1 button until
P_1 appears to the left of the FAD display. The speaker
fade ratio is now pre-set for the current type of broadcast.
This procedure can be repeated for other types of broadcast
content using the P2 and P3 buttons in the same manner as
described.
br LIQUID CRYSTAL DISPLAY PANEL
The Liquid Crystal Display (LCD) panel displays the frequency,
time, and activated functions.
NOTE: It is a characteristic of LCD panels that, if subjected to
cold temperatures for an extended period of time, they
may take longer to illuminate than under normal
conditions. In addition, the visibility of the numbers on
the LCD may slightly decrease. The LCD read-out will
return to normal when the temperature increases to a
normal range.
bs MODE SELECTION
The MODE button provides selection of the Compact Disc source
(CD Player or CD Changer). When no CD Changer is connected,
and a disc is loaded into the integral CD Player, the disc begins
playing. If the MODE switch is pressed, no change will occur.
However, when a CD Changer is connected, pressing the MODE
switch causes the CD changer to begin playing. Subsequent
MODE switch activation from this point results in switching
between the CD Player and the Changer. To return to radio
operation, press the BAND switch.
bt DISC SLOT
Gently insert the disc into the front panel slot (label surface facing
up) until the soft-loading mechanism engages and pulls the disc
in. The LOAD indication will momentarily appear on the display.
The ( ) indication illuminates and becomes animated, and the
track number (01) and CD (Compact Disc) appears on the display
panel.
CAUTION: This unit is designed for play of standard 5" (12cm)
compact discs ONLY. Do not attempt to use 3" (8cm)
CD-Singles in this unit, either with or without an
adapter, as damage to the player and/or disc can
occur. Such damage will not be covered by the
Warranty on this product.
bu TRACK SELECT ( / )
During disc play the Track Select functions are performed by the
TUN/TRK/SEK button; track select is used to quickly access the
beginning of a particular track. Each time the Forward Track
Select ( ) side of the button is pressed and released, the next
higher track number will be selected as shown on the display
panel. Similarly, each time the Backward Track Select ( ) side
of the button is pressed, the next lower track number will be
selected as shown on the display panel.
cl CUE/REVIEW FUNCTIONS ( / )
During disc play high-speed audible search to any section of the