Filter
Top Products
-5-
characteristics of human hearing. Press the LOUD button
momentarily to activate this feature and the indication LOUD will
appear on the display panel. Pressing the button again
momentarily will deactivate the feature (the LOUD indication will
disappear from the display panel).
9 AM/FM BAND SELECTOR (BAND)
During radio operation, each time this button is pressed, the radio
band is changed. The indication AM 1, AM 2, FM 1, FM 2 or
FM 3 will appear on the display panel according to your selection.
During disc play, pressing this button will stop play of the disc
and switch to radio operation. The disc will remain in the machine
without being ejected. During this time, the icon will remain
lit on the display panel to show that a disc is still loaded in the
unit. Press the MODE button to return to disc play from the
beginning of the last track in play.
When FM reception is weak and/or AM 1 or AM 2 is selected, the
stereo ( ) indication will disappear from the display.
bl MANUAL UP/DOWN TUNING, TRACK SELECT, AND
AUTOMATIC SEEK TUNING ( / )
To manually select a radio station, momematrily press the Up
Tuning ( ) side of the button to advance the unit two digits
higher or the Down Tuning ( ) side of the button to tune two
digits lower.
Pressing either side of the button for longer than 0.5 second and
then releasing will activate the Automatic Seek Tuning function.
The radio will seek the next station in the selected direction and
stop and remain at that frequency.
Pressing and holding either side of the button for longer than 0.5
second will cause the radio to continue tuning rapidly in the
selected direction until the desired station is reached. Tuning in
the same direction will continue unless the button is released at
the desired station. Pressing either side of the button during
disc play permits rapid selection of a desired track on the disc in
the respective direction.
bm MUTE (M) SELECTION
Press the M (MUTE) button momentarily to mute the volume
from the system (MUTE will appear on the display panel).
Pressing the button again, or selecting another function, will return
to the volume level setting in use before the MUTE function was
activated.
bn MONO/STEREO SELECTION
During FM radio operation, when the signal is broadcast in
stereo, the stereo mode is indicated by the icon on the
display panel. If the stereo signal is too noisy for comfortable
listening, or if the FM signal is broadcast in monaural instead of
stereo, the indication disappears from the display. When a
station on either AM band is selected, no stereo indication is
present on the display.
bo PRE-SET SCAN (PS) / AUTO-STORE TUNING (AS)
Press this button momentarily to scan the stations pre-set into
each AM band and each FM band. The unit will stop at each
pre-set station for approximately 8 seconds before continuing to
the next pre-set station (the pre-set station number on the display