Filter
Top Products
-4-
Pressing and holding this button enables/disables the beep tone
function. When the function is enabled the ( ) icon will appear
on the display. Each time a front panel key is pressed a beep
tone will sound.
4 TREBLE CONTROL
To adjust the treble level, first select the Treble mode by pressing
the S button 3 so the TRE indication appears on the display
panel. Within 5 seconds of choosing the Treble mode, press the
VOL button 2 to decrease the treble response or the VOL
button to increase it as desired. The level will be shown on the
display panel from a minimum - 7 to a maximum of + 7 (0 indicates
flat response). The display will automatically return to the normal
indication 5 seconds after the last adjustment or when another
function is activated.
5 BASS CONTROL
To adjust the bass level, first select the Bass mode by pressing
the S button 3 so the BAS indication appears on the display
panel.
Within 5 seconds of choosing the Bass mode, press the VOL
button 2 to decrease the bass response or the VOL button to
increase it as desired. The level will be shown on the display
panel from a minimum - 7 to a maximum of + 7 ( 0 indicates flat
response). The display will automatically return to the normal
indication 5 seconds after the last adjustment or when another
function is activated.
6 LEFT/RIGHT BALANCE CONTROL
To adjust the left-right speaker balance, first select the Balance
mode by pressing the S button 3 so the BAL indication appears
on the display panel. Within 5 seconds of choosing the Balance
mode, press the VOL button 2 to adjust the stereo balance to
the left channel speakers or the VOL button to adjust it to the
right channel speakers. The balance position will be shown on
the display panel from L 15 (full left) to R 15 (full right). When
the volume level between the left and right speakers is equal, 0
will be shown on the display panel. The display will automatically
return to the normal indication 5 seconds after the last
adjustment or when another function is activated.
7 FRONT/REAR FADER CONTROL
To adjust the front-rear speaker balance, first select the Fader
mode by pressing the S button 3 so the FAD indication appears
on the display panel. Within 5 seconds of choosing the Fader
mode, press the VOL button 2 to adjust the front-rear speaker
balance to the front speakers or the VOL button to adjust it to
the rear speakers. The fader position will be shown on the display
panel from R 15 (full rear) to F 15 (full front). When the level
between the front and rear speakers is equal, 0 will be shown on
the display panel. The display will automatically return to the
normal indication 5 seconds after the last adjustment or when
another function is activated.
8 LOUDNESS CONTOUR (LOUD)
When listening to music at low volume levels, this feature will
boost the bass and treble ranges to compensate for the