Filter
Top Products
RADIO AND CASSETTE CONTROLS
1 ON-OFF POWER BUTTON
Press this button to turn the unit on or off.
2 VOLUME/LEVEL CONTROL
To increase the volume level, press the side of the control. The volume will increase
and the level will be shown by the bars on the display panel. To increase the volume quickly,
keep the button pressed. To decrease the volume level, press the side of the control.
Keep the button pressed to decrease the volume quickly. This control is also used in
conjunction with the Menu button 3 to adjust the bass, treble, balance and fader levels as
described in 4, 5 , 6 , and 7 .
3 MENU BUTTON
VOLUME LEVEL MEMORY
This button is used to select the audio function ( bass, treble, balance, or fade) to be adjusted
using the Level control 2 .
Pressing the Menu button once will select the audio functions in sequence of bass (“BAS” on
display), treble (“TRE”), balance (“BAL”), and fader (“FAd”). The display will automatically
return to the normal indication 5 seconds after the last adjustment is made or when another
function is activated.
This button is also used to set the memory for the volume level which will be recalled when
the unit is turned on. To set the volume memory, turn the unit on and adjust the volume using
the Volume/Level Control
2 to the level which you wish to be recalled when the unit is turned
on. Then, press the Menu button and hold it for approximately 2 seconds. The volume level
bars on the display panel will flash twice and the volume is now set in the memory. If the unit
is turned off with the volume higher than the memory setting, the unit will return to the memory
setting when tuned back on. If, however, the unit is turned off with the volume lower than the
memory setting, the unit will return to the lower setting when turned back on.
OPERATING INSTRUCTIONS
1
cl
3 bn bs
bo
8 bu
bq bp
br
bl
cpcq9
cr
cu
cn
ctco
cs
bm
7
6
5
4
2
btcm
-1-