Filter
Top Products
LEFT/RIGHT BALANCE CONTROL LEFT/RIGHT BALANCE CONTROL
LEFT/RIGHT BALANCE CONTROL LEFT/RIGHT BALANCE CONTROL
LEFT/RIGHT BALANCE CONTROL
To adjust the left-right speaker balance, first select
the Balance mode by pressing the Select button
so the “BA” indication appears on the display panel.
Within 5 seconds of choosing the Balance mode,
turn the Level control counter-clockwise to adjust
the stereo balance to the left channel speakers or
clockwise to adjust it to the right channel speakers.
The balance position will be shown on the display
panel from “BA L31” (full left) to “BA R 31” (full right).
When the volume level between the left and right
speakers is equal, “BA 00” will be shown on the
display panel. The display will automatically return
to the normal indication 5 seconds after the last
adjustment or when another function is activated.
FRONT/REAR FADER CONTROL FRONT/REAR FADER CONTROL
FRONT/REAR FADER CONTROL FRONT/REAR FADER CONTROL
FRONT/REAR FADER CONTROL
To adjust the front-rear speaker balance, first select
the Fader mode by pressing the Select button so
the “FA” indication appears on the display panel.
Within 5 seconds of choosing the Fader mode, turn
the Level control counter-clockwise to adjust the
front-rear speaker balance to the rear speakers or
clockwise to adjust it to the front speakers. The fader
position will be shown on the display panel from
“FA R31” (full rear) to “FA F 31” (full front). When the
level between the front and rear speakers is equal,
“FA 00” will be shown on the display panel. The
display will automatically return to the normal
indication 5 seconds after the last adjustment or
when another function is activated.
AUDIO EQUALIZER SELECTOR (EQ) AUDIO EQUALIZER SELECTOR (EQ)
AUDIO EQUALIZER SELECTOR (EQ) AUDIO EQUALIZER SELECTOR (EQ)
AUDIO EQUALIZER SELECTOR (EQ)
The Audio Equalizer feature adjusts the frequency
response, allowing you to tailor the sound
reproduction to 3 different acoustic settings. Each
press of the button will select a different effect
( ROCK , CLAS or POP ) as shown by the
indication on the display panel. Pressing the button
again will restore normal stereo reproduction ( FLAT
indication on the display panel).
LOUDNESS CONTOUR (LOUD) LOUDNESS CONTOUR (LOUD)
LOUDNESS CONTOUR (LOUD) LOUDNESS CONTOUR (LOUD)
LOUDNESS CONTOUR (LOUD)
When listening to music at low volume levels, this
feature will boost the bass and treble ranges to
compensate for the characteristics of human hearing.
Press the button momentarily to activate this feature
and the indication “LOUD” will appear on the display
panel. Pressing the button again momentarily will
deactivate the feature (the “LOUD” indication will
disappear from the display panel).
128-5504128-5504
128-5504128-5504
128-5504
7 of 127 of 12
7 of 127 of 12
7 of 12
66
66
6
OPERATING INSTRUCTIONSOPERATING INSTRUCTIONS
OPERATING INSTRUCTIONSOPERATING INSTRUCTIONS
OPERATING INSTRUCTIONS
AUDIO MUTE SELECTOR (MUTE) AUDIO MUTE SELECTOR (MUTE)
AUDIO MUTE SELECTOR (MUTE) AUDIO MUTE SELECTOR (MUTE)
AUDIO MUTE SELECTOR (MUTE)
Press this button momentarily to mute the volume
from the system (“MUTE” will flash on the display
panel). Pressing the button again or adjusting the
Volume control will return to the volume level
setting in use before the Mute function was
activated.
AM/FM BAND SELECTOR (BAND) AM/FM BAND SELECTOR (BAND)
AM/FM BAND SELECTOR (BAND) AM/FM BAND SELECTOR (BAND)
AM/FM BAND SELECTOR (BAND)
RADIO MODE SELECTOR RADIO MODE SELECTOR
RADIO MODE SELECTOR RADIO MODE SELECTOR
RADIO MODE SELECTOR
Each time this button is pressed, the radio band is
changed. The indications “AMI”, “AMII”, “FMI”, “FMII”
or “FMIII” will appear in the display panel according to
your selection.
During cassette play, pressing this button will return
to radio operation.
MANUAL UP/DOWN TUNING ( MANUAL UP/DOWN TUNING (
MANUAL UP/DOWN TUNING ( MANUAL UP/DOWN TUNING (
MANUAL UP/DOWN TUNING (
/ /
/ /
/
) )
) )
)
AUTOMATIC SEEK TUNING (SEEK) AUTOMATIC SEEK TUNING (SEEK)
AUTOMATIC SEEK TUNING (SEEK) AUTOMATIC SEEK TUNING (SEEK)
AUTOMATIC SEEK TUNING (SEEK)
To manually select a radio station, momematrily
press the Up Tuning ( ) side of the button to
advance the unit one digit higher or the Down Tuning
(
) side of the button to tune downward.
Pressing either side of the button for longer than 0.5
seconds will activate the Automatic Seek Tuning
function. The radio will seek the next station in the
selected direction and stop at that frequency. The
Seek function can be stopped by pressing the button
again or activating any other tuning function.
LOCAL/DISTANT SELECTOR (LO/DX) LOCAL/DISTANT SELECTOR (LO/DX)
LOCAL/DISTANT SELECTOR (LO/DX) LOCAL/DISTANT SELECTOR (LO/DX)
LOCAL/DISTANT SELECTOR (LO/DX)
This feature is used to select the strength of the
signals at which the radio will stop during Automatic
Seek Tuning. Pressing the button will select the Local
setting (“LOC” will appear on the display panel) and
only strong (local) stations will be received. Pressing
the button again will select the Distant setting (“LOC”
will disappear from the display panel) and the radio will
stop at a wider range of signals, including weaker
(more distant) stations.
FM MONO/STEREO SELECTOR (MONO) FM MONO/STEREO SELECTOR (MONO)
FM MONO/STEREO SELECTOR (MONO) FM MONO/STEREO SELECTOR (MONO)
FM MONO/STEREO SELECTOR (MONO)
During FM radio operation, this button is used to
select mono or stereo reception of the broadcast
signal. Under normal reception conditions, the unit
should be left in the stereo mode as indicated by the
“ST” on the display panel and the symbol when
tuned to an FM stereo signal. If the stereo signal is
too noisy for comfortable listening, press the FM
Mono/Stereo Selector button to switch to mono
reception (the “ST” and indications will disappear