Filter
Top Products
indications AM 1, AM 2, FM 1, FM 2 and FM 3
will appear on the display panel according
to your selection. During FM operation, when the
station is broadcasting in stereo, the stereo icon
appears on the display, together with an ST in-
dication. During AM operation, no indications are
displayed, except the AM band.
During CD play, pressing this button will
change to radio operation without ejecting the
disc.
bm MANUAL UP/DOWN TUNING ( / ),
STATION SEEK AND TRACK SELECTION
Each time the Up Tuning side of the button
( ) is pressed, the radio will tune one frequency
step higher. Similarly, each press of the Down
Tuning side of the button (
) will tune one
frequency step lower. To manually tune in a
station, press the appropriate directional side of
the button until the desired frequency is
reached.
Pressing and holding either side of the button
for longer than 0.5 second will cause the radio
to continue tuning rapidly in the selected
direction until the button is released, at which
point it will seek the next available station and
stop.
During CD play operation, momentarily
pressing and releasing either side of the button
will increase or decrease CD track selection in
sequence. Pressing and holding either side of
the button for longer than 0.5 second, will cause
the elapsed time of the current track in play to
increase or decrease accordingly.
bn AUTO-STORE TUNING (A/PS)
PRE-SET SCAN TUNING
Press the A/PS button momentarily to scan
the 6 stations in the pre-set memories of the
band in use. The unit will stop at each pre-set
station for 5 seconds before continuing to the
next pre-set station (the frequency on the
display panel will flash during Pre-Set Scan
operation). Press the button again momen-
tarily to stop Pre-Set Scan operation and re-
main on the selected frequency.
Pressing the button for longer than 2 seconds
will activate the Auto-Store Tuning feature. The
radio will automatically scan the band in use and
enter strong stations into the pre-set memory
positions for that band. If you have already
set the pre-set memories of that band to your
favorite stations, activating the Auto-Store
Tuning feature will erase those stations and
enter the new strong stations. This feature is
most useful when traveling in a new area where
you are not familiar with the local stations.
bo STATION PRE-SET MEMORIES
To set any of the 6 pre-set memory buttons,
use the following procedure:
1. Turn the unit on and select the desired band.
2.Select the first station to be pre-set using
the Manual Up/Down or Up/Down Seek
Tuning functions
bm.
3.Press the pre-set button to be set and
continue to hold the button in. The pre-set
number will appear on the display panel. The
station is now set into the memory of that
pre-set button and can be re-called at any-
time by momentarily pressing that button.
4. Repeat the above procedure for the remaining
5 pre-sets on the band in use and for the
other 4 bands of the unit.
bp LIQUID CRYSTAL DISPLAY PANEL
The Liquid Crystal Display (LCD) panel displays
the frequency, time, and activated functions.
NOTE:It is a characteristic of LCD panels that,
if subjected to cold temperatures for
7
OPERATING INSTRUCTIONS