Filter
Top Products
desired. The bass level will be shown on the
display panel from a minimum of -5 bars to a
maximum of +5 bars with respect to center (BAS
= to a single bar represents flat response). The
display will automatically return to the normal in-
dication 5 seconds after the last adjustment or
when another function is activated.
5 TREBLE CONTROL
To adjust the treble level, first select the Treble
mode by pressing the AUDIO SEL button
3
until the TRE indication appears on the
display panel. Within 5 seconds of choos-
ing the Treble mode, press the + or - but-
tons of the Volume +/ - Level Control
2 to
adjust the treble response as desired. The
treble level will be shown on the display panel
from a minimum of TRE = -5 bars to a maxi-
mum of TRE = +5 bars with respect to center
(TRE = to a single bar represents flat re-
sponse). The display will automatically re-
turn to the normal indication 5 seconds after
the last adjustment or when another func-
tion is activated.
6 LEFT/RIGHT BALANCE CONTROL
To adjust the left-right speaker balance, first
select the Balance mode by pressing the
AUDIO SEL button
3 until the BAL indication ap-
pears on the display panel. Within 5 seconds of
choosing the Balance mode, press the - button
of the Volume +/- Level Control
2 to adjust the
stereo balance to the left channel speakers or
the + button of the control to adjust it to the
right channel speakers. The BAL position will be
shown on the display panel from a minimum of
- 5 bars(full left) to a maximum of +5 bars (full
right) with respect to center. When the volume
level between the left and right speakers is
equal, a single bar will be shown on the display
panel. The display will automatically return to
the normal indication 5 seconds after the last ad-
justment or when another function is activated.
7 FRONT/REAR FADER CONTROL
To adjust the front-rear speaker balance, first
select the Fader mode by pressing the
AUDIO SEL button
3 until the FAD indication
appears on the display panel. Within 5 seconds
of choosing the Fader mode, press the + or the -
buttons of the Volume +/- Level Control
2 to
adjust the front-rear speaker levels as desired.
The FAD position will be shown on the display
panel from minimum of -5 bars (full rear) to a
maximum of + 5 bars (full front) with respect to
center. When the volume level between the
front and rear speakers is equal, a single bar
will be shown on the display panel. The dis-
play will automatically return to the normal in-
dication 5 seconds after the last adjustment
or when another function is activated.
8 LOUDNESS CONTOUR (LOU)
When listening to music at low volume levels,
this feature will boost the bass and treble ranges
to compensate for the characteristics of human
hearing. Press the LOU button to activate this
feature as indicated by LOUD on the display
panel. Pressing the button again will de-activate
the function and LOUD will disappear from
the display.
9 AUDIO ATTENUATION (ATT)
The audio mute function is performed using the
ATT (attenuator) button. This control is used to
mute the volume from the system. When the
ATT button is pressed, the indication ATT
appears on the display panel and the volume
will be muted. Pressing the ATT button again,
or activating the VOL +/- function of the unit,
will return to the volume level setting in use
before the mute function was activated.
bl TUNER, AM/FM BAND SELECTOR
(TUNER)
During radio play, each time the TUNER button
is pressed, the radio band changes. The
6
OPERATING INSTRUCTIONS